Differences

This shows you the differences between two versions of the page.

--- technical_specifications [2026/02/10 20:39] – [Connections] walter
+++ technical_specifications [2026/02/11 20:53] (current) – [Connections] sol
@@ Line 68: / Line 68: @@
   * **MicroSD:**
     * Internal slot (card sold separately)
-      * **The SD card is working in 1-bit SPI mode at 25 Mbps, thus this is a bit slower than USB.**
+      * **The SD card is working in 1-bit SPI mode at 25 Mbps (3.125 MB/s), thus this is more then 3x slower than USB.**
   * **Display Output:**
@@ Line 85: / Line 85: @@
   * **Networking:**
     * Ethernet (100 Mbps)
-      * Due to the software overhead, it can reach about 600 kB/s over TCP.
+      * **Due to the software overhead, it can reach about 600 kB/s (4.8 Mbps) over TCP.**
     * Wi-Fi (built-in)
-      * The connection between the WiFi module and the FPGA is limited to 5 Mbit/s. Together with TCP overhead, it reaches about 300 kB/s.
+      * **The connection between the WiFi module and the FPGA is limited to 5 Mbit/s. Together with TCP overhead, it reaches about 300 kB/s.**
 <WRAP center round important 60%>
@@ Line 101: / Line 101: @@
     * User port (26-pin internal, adapter sold separately)
-  * **Power:** 12V DC
+  * **Power Requirements:**
+    * 12V DC 2.5A 30.0W
+    * Barrel connector with center-positive polarity
 {{tag>fundamentals}}